VS-CV1/CV2 $765.00/$840.00
Our transport seat is the first in the industry that allows you the choice as to which type of belt system to use:
1. For those departments that wish to use the OEM seat belt restraint system choose the VS-CV1 seat.
2. For those departments who may transport more violent prisoners and who are not concerend about using only the OEM seat belt system can order the VS-CV2. This system features the SB-CV1 Custom Outboard Locking Restraint System.
3. The SB-CV1 is our FM-VSS-029 Certified Seat Belt System that can be used on all passenger cars, with or without transport seat, allowing officers to secure their prisoners from the outside of the rear seat. This will soon be available for other cars and most sport utilities.
4. The DP-CV1 Door Panels eliminates all OEM panel openings and trim such as ashtrays, window controls, armrests, and pull handles. These units are not cut or machined from a sheet of plastic. Our panels are custom molded with rounded edges and fit the exact contour and shapeof the metal inner door. The stepped design at the top surface also covers the window tracking slot to help reduce the chance of unwanted fluids or liquids becomming trapped inside the door. Open the door, hose it down, and you're done.
5. WP-CV1 Lexan Rear Window Panels easily attach to the interior window frame. These units speed decontamination, and will prevent the occasionally violent prisoners from kicking out those expensive rear windows.
6. The VF-CV1 Floor Pan fits your car floor exactly like a truck bed liner. Custom molded to each vehicle, this unit also features "anti-skid" grit strips in the bottom to prevent injury to your prisoner, and possible liability to your department. If the security screen has not been has not been installed yet, the pan installs in thirty minutes.
7. HL-CV1 Head Liner is the first one piece headliner cover for the rear passenger of a cruiser/squad installs in fifteen minutes using existing hardware and mounting holes. Not a replacement headliner - this insert covers the existing one. Perfect for K-9 vehicles.
8. DC-CV1 Rear Window Deck Cover is also new to the industry. This unit is a replacement for the OEM deck cover which comes out quite easily by removing three plastic retaining pins. The DC-CV1 is molded to allow level and more outboard mounting of all rear deck lights, and allows flush or flat placement of the deck lights within two and one half inches of the rearwindow pillar adn window. Bulb replacement is easily performed without removing the deck cover.
Great for K-9 cars in that all wires are hidden. There is absolutely no chance for the work dog to chew through the wires, short out the lights or get shocked. Also great for cleaning up the K-9 car since all of the dog hair can be swept up and the saliva wiped away.
COMPONENTS MAY BE PURCHASED SEPERATELY.
VS-CV1 REAR TRANSPORT SEAT - For use with OEM restraint system $275.00
VS-CV2 REAR TRANSPORT SEAT - with the SB-CV1 OUTBOARD LOCKING RESTRAINT SYSTEM $357.00
SB-CV1 CUSTOM OUTBOARD LOCKING DMV CERTIFIED REAR SEAT BELT SYSTEM (set) $89.95
VF-CV1 REAR FLOOR PAN $113.95
DP-CV1 MOLDED BOTTOM REAR DOOR PANELS (set) $99.95
WP-CV1 LEXAN REAR WINDOW PANELS (set) $105.95
WPM-CV1 WIRE MESH WINDOW PANEL (set - See photo in K-9 compartment) $92.00
HL-CV1 REAR HEADLINER PANEL / COVER $103.50
DC-CV1 REAR WINDOW DECK COVER $104.95
|