RD-1002X $98.00
The half-coverage shell is constructed of Tenntex Thermo Composite utilizing high pressure compression mold for increased strength
while keeping a light weight helmet.
Complete helmet with shield with not be more than 2 lbs. 8 oz.
Features include:
Quick release nylon tubular chin strap with black rubber chin cup, six and one half inch full-flip polycarbonate face shield .125 thick.
Sizing System:
S/M: 6 3/4 - 7 1/4
L/XL: 7 3/8 - 7 7/8
XXL: 8 - 8 1/8
STANDARDS: Helmet meets or exceeds National Institute of Justice 0104.02
(riot) and 0105.01 (crash) requirements and Department of Transportation
FMVSS-218 (for impact retention only).
Available Accessories:
1. Nape pad (nine inch ballistic nylon snap on nape pad)
2. 1199 Black Drawsting helmet bag
3. 1200 Zippered Utility/Helmet bag with handles 15"X10X8"
4. 1250/GD Bag has Compartment for gas mask and handcuffs, straps for shoulders
or can be used for back pack.
RD-TAC $109.00
The half-coverage shell to be constructed of Arimid Fiber Reinforced Thermoplastc composite utilizing high pressure compression molding for increased strength while maintaining a light weight helmet with shield shall not exceed 3 lbs.
Features include:
Quick release nylon tublular chin strap with black rubber chin cup, six and one half inch full-flip polycarbonate face shield .125 thick, nine inch
snap on ballistic nylon cervical neck protector.
Sizing System
S/M: 6 3/4 - 7 1/4
L/XL: 7 3/8 - 7 7/8
XXL: 8 - 8 1/8
STANDARDS: Must meet or exceed all applicable industry standards including
National Institute of Just 0104.02 (riot) and 0105.01 (crash) requirements and Department of Transportation FMVSS-218 (for impact only).
Available Accessories:
1. 1199 Drawstring helmet bag, Black
2. 1200 zippered Utility/Helmet bag with handles 15"X10"X8"
3. 1250/GD Bag has Compartment for gas mask and handcuffs, straps can be used to carry on shoulder or carried as a back pack.
FC-210 $249.00
Full-face/full coverage shell is constructed of lightweight composite material. The shell features and adjustable, six position ratchet anti-fog face shield. The shell design incorporates a modular
jaw piece that can be raised with push of a button that is located under the chin edge of the helmet safely opened or closed with one hand and
locks in place.
Weight approximately 3.5 lbs.
Sizing System:
X-Small: 6 3/4 - 6 7/8, Small: 7 - 7 1/8, Medium: 7 1/4
Large: 7 3/8 - 7 ½, X-Large 7 5/8 - 7 7/8,
STANDARDS: Must meet or exceed all applicable industry standards including National Institute of Justice 0104.02 riot and 0105.01 (crash) requirements and Department of Transportation FMVSS-218 (for impact only).
Available Accessories:
1. QR104 Quick Release Buckle (Echo)
2. 1199 Black Drawstring helmet bag
3. 1200 Zippered Utility/Helmet bag with handles 15"X10"X8"
4. 1250/GD Bag has Compartment for gas mask and handcuffs, straps for
shoulders or can be used for back pack.
RS-100 $159.95 CT-100 $185.95
Tenntex Thermo Composite three-quarter coverage shell with integral visor. Helmet sides flare to accommodate double canister gas masks behind face shield. Most current gas masks can be used
with his helmet.
(RS-100) helmet with not be more than 3 pounds including the shield and
(CT-100) helmet with not be more than 3 pounds 5 ounces fully equipped including the shield grid.
Sizing System:
S/M: 6 3/4 - 7 1/4, L/XL: 7 3/8, and XX-L 8 - 8 1/8
Oversize Helmets 7 7/8 - 8 1/4 Add $15.00 per helmet
STANDARDS: Must meet or exceed all applicable industry standards including National Institute of Justice 0104.02 (riot) and 0105.01 (crash) requirements and Department of Transportation FMVSS-218 (for impact only).
Available Accessories:
1. Nape Pad (nine inch ballistic nylon snap on nape pad)
2. 1199 Black Drawstring helmet bag.
3. 1200 Zippered Utility/Helmet bag with handles 15'X10"X8"
4. 1250/GD Bag has Compartment for gas mask an handcuffs, straps for
shoulders or can be used as a back pack.
|